This is required in order for the exploit to work. Select the "Wii" button from the Wii main menu. Select "Wii Settings. Select "Yes" and then "I Accept" to begin downloading and installing the system update. Get an SD card that is 2 GB or smaller. Check the list at wiibrew.
Format your SD card on your computer. Insert your SD card into your computer's card reader. If your computer doesn't have a card reader, you'll need a USB reader. Right-click on your SD card and select "Format. Select your SD card, then click the "Erase" button. Select "FAT" from the "Format" menu. Determine your Wii's MAC address. This is the address that is unique to your Wii. This will open the Wii Options menu.
Select "Wii Settings" and then select "Internet" from the second page. This is the website that will generate a letterbomb exploit specifically for your Wii. Enter your Wii's MAC address into the fields. Each field will get two characters for the MAC address. Select your region in the "System Menu Version" section. If you aren't sure, you can see which version you're running by opening the "Wii Settings" menu again and looking in the upper-right corner.
Click "I'm not a robot" and then click one of the download buttons. Double-click the downloaded ZIP file. This will display the contents. You should see a "private" folder and a "boot. Drag and drop the "private" folder and the "boot. This will place them in the correct locations on the card. Remove your SD card from your computer and insert it in the Wii.
You'll find the SD card port on the front of the Wii, behind the panel that folds down. Click the Messages button on the Wii's main menu. You should see a red envelope with a bomb tucked in it.
You may need to press the "-" button to go back a day or more to find it. Double-check that the "private" folder and the "boot. Select the red letter to launch the letterbomb exploit.
You'll see a black screen with text appear, much like the Command Prompt in Windows. Press "1" and then "A" on your Wii remote to continue when prompted. This will start the installation process. If your Wii remote turns off when the HackMii installation begins, your Wii remote might be too new. Newer Wii remotes will turn off when the hack is detected. You'll need to find a Wii remote made before Select "BootMii" and press "A.
Select "Prepare an SD card" and then "Yes, continue. This will install the BootMii software. Return to the main menu and select "Install The Homebrew Channel.
Select "Exit" after installation to load the Homebrew Channel. If the Homebrew Channel loads after a few moments, you've successfully modded your Wii. Next up you'll be installing the software necessary to rip games and play backups from your external hard drive or your flash drive or from a burned DVD. Part 2. Format an external hard drive or a flash drive on your computer. Plug an external hard drive or a flash drive into one of the computer's USB ports.
This format will allow you to save Wii and GameCube games. The games you rip or download will be stored on the drive. While you can use the Windows system formatting tools, they won't be able to format drives larger than 32 GB. If you have a larger drive, the FAT32 Format tool will allow you to format the disk. Run the utility, select your external hard drive or your flash drive, and click "Start.
Right-click on your external hard drive or your flash drive and select "Format. Select your external hard drive or your flash drive and click the "Erase" button. Select "FAT32" from the "Format" menu. Download the IOS v6 installer. This is a homebrew application that will install the necessary system software to install other homebrew system software IOS files.
You can find the installer in various locations online. When asked if you want to fakesign the ticket or TMD, you should press B. This not only copies all channels that are installed on the console, but afterwards, you can also transfer channels between the console and Dolphin by using an SD card and the Wii Menu's data management screen. It can extract an individual save as. GCI files from a real memory card to the root of SD card. For the purpose of this guide you should extract what you need for Dolphin onto the SD card.
This section is for ripping individual saves to be used on Dolphin. It's a homebrew app that can transfer save files between the console's internal storage and an SD card. It can extract an individual save from the Wii's internal storage for Dolphin to use. Progress Continues We've already had updates since Dolphin 5. The Dolphin Emulator Wiki needs your help!
A disc image in split parts will need to be joined before dolphin can read it. A simple command from command prompt and terminal can do it! Use the example command for your system. Use the "cd" command to change directory to the file's location. The part files can be deleted after the joined file is created. It will begin the ripping process to the storage device:. You have to compress it again unfortunately. Or you can run WiiScrubber 1. By Solderguy Follow.
More by the author:. Did you make this project? Share it with us! I Made It! Remote Control Light Switch by alanmerritt in Arduino. Reply Upvote. Solderguy baconmaster Reply 12 years ago on Step 1. Are you trying to back-up a burned Wii disk or a store bought Wii disk?
Foaly7 12 years ago on Introduction. Solderguy Foaly7 Reply 12 years ago on Introduction.
0コメント